Return to the exciting era of 1999

Chapter 98

But when it comes to formal production, large orders often fall into the hands of foreign-funded or joint-venture factories like Swell, and small factories jointly developed can only get small orders.

But it is absolutely no problem to support a small factory with these orders. There are countless small factories affiliated to the elevator factory in Tianjin.

A large number of factories are eliminated every year because the other party cannot afford it.

Without independent research and development capabilities, I can only be at the mercy of the technical engineers of the elevator factory, and I don't know the direction of my efforts at all.What's more, designers don't know the direction, especially when it comes to polymer materials, such as rubber springs and plastic properties.

Of course stamping, metal materials... everything is very important.

Don't look at these engineers who have obtained good positions in foreign companies with their high education abroad, it is difficult for one of them to have such a wide knowledge reserve!

There are very few people like Li Dequn who can accumulate so much knowledge before the age of 40 and win the title of chief engineer.But the opponent also has a shortcoming, English!

The other party is a techie, and he is not sure about English, otherwise he would have been promoted long ago.

Ji Donglai worked on elevators for at least eight years in his previous life, adjusting small products such as elevator shoes with his hands.

"It's simple, and I'll connect you with any issues involved! The actual investor in that factory is my classmate's father, and the samples inspected by the foreigner are all on-the-spot experiments..."

After completing the handover with Li Dequn, Ji Donglai felt extremely happy.

Modify this document directly, then print it out and take it directly to the factory.

"Need to open so many molds at once?"

Looking at the mold drawings that Ji Donglai brought over, Lu Shipeng's eyes were also full of surprise.

Ji Donglai designed the molds for this set of skate boots. There are twelve sets of molds for cutting the main part and three sets of molds for bending.

For the shoe rail frame, there are two sets of molds for cutting, two sets of molds for pressing, and three sets of molds for shaping and bending.

For the skeleton of the rubber spring, two sets of molds are used for cutting, and one set of molds for the reinforcement plate.

When the whole skeleton was being welded, Ji Donglai opened three sets of molds. After all, it is impossible for Ji Donglai to make this kind of mass-produced thing by making people stick their buttocks over there and rely on the feel.

The quality stability of the products made in that way is much worse, and it is easy to hurt people, and the efficiency is too low.

As for the inner container of the plastic slide rail, Ji Donglai made a set of molds, and Ji Donglai made a sixteen-cavity mold for the transfer mold of the rubber spring.

The non-standard bolts inside are a bit difficult for Ji Donglai. The quantity of this thing is very large. Tapping is a problem, and the surface treatment needs to be galvanized.

Moreover, the surface of the main body of the skateboard frame needs to be sprayed with plastic. It happens that Ji Donglai Particleboard Factory has this process. The two can be figured out theoretically, as long as a little modification is made, and a static electricity is added.

It seems to be a simple small product, but Ji Donglai needs to make a lot of things to make it. He really can't find the matching products around, so Ji Donglai can only take the product to Hebei for surface treatment.

"Steel plates of this thickness are not easy to buy. This is a full-scale plate, and the price is at least a few hundred yuan per ton..."

Looking at the [-]mm full-scale board on the drawing, Ding Aixing felt a little worried.

Working here with Ji Donglai during this time, Ding Aixing learned a lot, especially various hard-core knowledge, which Ding Aixing had no access to at school.

According to the experience taught by Ji Donglai, cold-rolled sheets and hot-rolled sheets are two completely different standards, and cold-rolled sheets basically meet the thickness requirements of more sheets.

Most of the hot-rolled sheets do not meet the requirements, especially the domestic rolling mills generally cut corners and materials, and they have to work hard on the thickness if they want to make more money.

With a size of five microns, a coil of steel of tens of thousands to hundreds of thousands of meters can be sold hundreds of thousands more.

"I have a solution for steel. You guys are experimenting with crafts. Once you get the mold back, don't stop for a moment. This job is a big deal!"

Ji Ping's factory is dry-rolled steel. Ji Donglai talked with his father a few days ago, and now the factory is not doing well.When profits were good, there were four electricians working in black and white shifts at the factory, but now only one electrician, Ji Ping, is left.

Moreover, it was not possible to fill up the queue, so Ji Ping had the opportunity to earn extra money, and Ji Donglai was fairly familiar with the factory owner.

"I don't even bother to open the book for you. Donglai, what is your current position in that factory? How much can they use?"

Yu Wei, the owner of the rolling mill, was sitting in the reception room, playing chess with his men, chatting with Ji Donglai casually.

Yu Wei knew Ji Ping's family background, and he didn't have a wide range of friends, so Yu Wei guessed that Ji Donglai was at most a clerk in a foreign company, and don't think about anything else.

"I was doing translation, and I happened to come across this blueprint. I saw a lot of work this time, so now I buy some steel plates from you. I heard from my father that there are a lot of steel plates in your rolling mill. We all They are acquaintances, and they have a higher degree of trust in doing things. The factory has regulations, and the payment cycle may be longer. Can you do it here?"

Looking at Yu Wei who expressed great importance, Ji Donglai directly stated that he was the translator of Swell Company, and Yu Wei just looked up.

"In the middle, the price list of our steel plate is available at the sales side, you can just ask them! But credit is not acceptable, and we are not the only shareholder in our rolling mill, so there is no way to accommodate, please understand!"

Seeing that Ji Donglai was still a child, Yu Wei's face was full of disgust, and he thought to himself, you little kid, do you want to be an interpreter?
There are so many college students in the capital, and those foreign-funded factories don't necessarily want them, but you?joke!Well, there is such a big deception in the electrician's family!

Besides, the factory is not doing well now, and Ji Ping's salary is also under pressure. Yu Wei thinks that Ji Donglai is just having a show with Ji Ping, and plans to get some steel as collateral.

In case the wages cannot be paid and the steel is taken away directly, this inferior method was used by Yu Wei in his early years.

Now there are a lot of steel products all over the country, and sales are also in trouble, even if it is close to the Beijing circle!Yu Wei has a large amount of steel in his warehouse, and he hopes to find a suitable buyer, but he is definitely not a half-grown kid like Ji Donglai.

It is said that the economic situation will improve, Yu Wei is also waiting, he saw the road construction, but did not see the rest, Yu Wei got angry when he thought about it.

"Uncle, my father is still working here, so can't you accommodate me?"

Looking at Yu Wei's appearance, Ji Donglai was a little disappointed.

After all, Ji Ping has worked in Yuwei's company for more than ten years, even if he is an acquaintance, he won't lose face like this.

(End of this chapter)