In Wasteland Survival I have a Dyson Sphere

In Lin Yu's shelter and the manufacturing room, the basic manufacturing station is manufacturing fixed-line devices.

Lin Yu is using the three-dimensional simulator of the basic manufacturing platform to simulate new materials.

After completing it and letting the basic manufacturing bench record it, Lin Yu began to design the garage door!

Because of the basic manufacturing bench, many electronic devices can be manufactured.

Although a lot of silicon material is needed to solve chip problems, with the furnace, these are not a problem.

According to the characteristics of the furnace, the silicon material can be purified directly from the stone ore. After all, silicon material is also a stone, or in other words, the stone weathers to form sand and gravel, and finally to sand, it is all of the same origin!

This time, Lin Yu plans to make the garage door an induction electric door that can automatically sense his own vehicle.

When the vehicle approaches, the door can be opened automatically to allow the truck to quickly enter the garage!

By the way, Lin Yu also designed the door of the shelter!

After completion, Lin Yu also placed the required materials next to the basic manufacturing table, waiting for the hardening device to be completed before manufacturing the door!

After looking at the manufacturing time and finding that there were still two hours to complete the hardening device, Lin Yu also came to the outside world.

After looking at the work of the ion crusher, I found that it had advanced to a depth of 20 meters.

Seeing the circular hole with a width of six meters, Lin Yu stepped forward to turn off the ion crusher.

Next, Lin Yu used an ion crusher to process the corners, forming a square channel with a width of six meters and a length of 20 meters!

Because there was no hardening, Lin Yu did not continue to expand the garage area.

Next, Lin Yu came to the shelter and waited for the basic manufacturing platform to complete the manufacturing.

Two hours passed quickly. During these two hours, Lin Yu absorbed a lot of knowledge in his mind.

When I came to the basic manufacturing station, I saw that the hardening device and supporting ion source had been manufactured, and I immediately took them out.

Next, Lin Yu began to build the manufacturing gate.

The manufacturing station will not turn such a small thing into a nano-egg because its size is smaller than the manufacturing space inside the manufacturing station.

So it can be completely manufactured!

After letting the manufacturing bench continue manufacturing, Lin Yu took the hardening gun and ion source to the garage outside.

Looking at the 20-meter-long passage, Lin Yu walked in,

If you are facing the door of the shelter, this newly opened passage is on the right side of the door of the shelter.

So Lin Yu pointed the hardening gun at the wall on the left and inserted it directly!

Then start the ion source and shoot it into the wall quickly.

As the ion source acts, the surrounding walls become visibly hardened and the edges become smooth.

This is the ion collecting materials in the soil and strengthening the surrounding walls.

The total amount of material remains constant, so in other parts of the wall, the soil begins to loosen,

This is also inevitable. To harden the soil, materials must be collected and compressed.

However, the surrounding soil is loose, so it is not a big problem for now.

Moreover, Lin Yu is also preparing to invest a large amount of hardened ion sources to harden the entire shelter.

In this way, even if the soil on the mountain above becomes loose and collapses, it will have no impact on your shelter!

The current miniature ion source has an effective range of only ten meters wide and five meters thick.

In other words, this garage requires eight ion sources!

This time, Lin Yu created a total of ten ion sources, which were more than enough for use.

As each ion source is excited by the hardening gun, this garage is visible to the naked eye, giving it a very solid feeling!

This kind of place hardened by the ion source has defensive capabilities that can withstand the frontal attack of the laser main gun.

This is also a characteristic of interstellar era technology. The penetration and sputtering capabilities of attack weapons have been greatly enhanced.

Corresponding defense measures are also developing simultaneously!

This kind of hardening device is aimed at the strongest single attack of the first-level peak civilization!

At the same time, the various physical properties of this hardened land are also very powerful. If Lin Yu keeps using this ion source to harden the shelter, he can build an indestructible underground fortress!

While the ion source was working, Lin Yu returned to the shelter and came to the manufacturing room. He took a look and found that in ten minutes, the garage door assembly would be completed.

After waiting for ten minutes, when the garage door assembly was completed, Lin Yu immediately took it out.

After assembling these groups on the tricycle, Lin Yu rode out of the shelter.

Go to the garage door and take off these garage doors.

For defense reasons, the garage doors manufactured by Lin Yu this time are all lightweight alloy doors made of high-strength materials.

Holding the door frame, Lin Yu placed one of the door frames on the edge of the passage.

The mechanical device inside the door frame was activated, and rows of arrow-shaped long rods on the opposite side of the door frame were ejected directly.

The powerful force directly inserts it into the wall,

This part of the area has not been hardened, so it can be inserted!

The same method is used for the other half of the door frame, as well as the top door frame. Find Shuyuan www.zhaoshuyuan.com. After the three door frames are all fixed, Lin Yu takes out the three ion sources that have not been used and hardens them one by one. The plane on which the door frame lies.

At this time, Lin Yu still had the last two ion sources left in his hands.

Seeing that the main body of the garage has been hardened, we continue.

The internal space will continue to expand, and the current ion source is insufficient, so construction has been suspended!

After looking outside, he found that it was getting dark. Lin Yu took the ion crusher next to him back to the shelter and started to use the remaining two ion sources.

With these two ion sources, Lin Yu came to the manufacturing room.

The two ion sources were directly driven into the two walls on the side,

As the ion source was excited, the newly opened manufacturing room was further strengthened.

Next, Lin Yu continued to manufacture new plasma containers,

Because glass is needed, the existing materials are only enough for Lin Yu to make 50 plasma containers.

Therefore, the placement of the furnace also needs to be put on the agenda!

After inputting a new batch of fifty plasma vessel manufacturing queues into the basic manufacturing station, Lin Yu also began to be busy with other things.

When we arrived outside the shelter, it was already very dark.

So Lin Yu quickly drove the truck in,

At the same time, Lin Yu erected the garage door placed aside and began to install it.

Because it is made of lightweight alloy steel, it is not very heavy. Coupled with Lin Yu's strong physique, it can be lifted directly!

After installing the gate, Lin Yu closed the door and directly started the gate's simulation interface.

It directly becomes the same situation as the surrounding mountains, and it is very concealed!

After doing all this, Lin Yu also returned to the shelter and began to think about how to place the arc furnace!