In Wasteland Survival I have a Dyson Sphere

At night, in the shelter, Lin Yu took out the arc furnace nano-egg that he had obtained by unlocking automated metallurgy.

After careful inspection, I found that the height of this arc furnace reached ten meters.

Although the altitude is very high, there are no toxic or harmful gases.

Moreover, the by-products produced by smelting can also be recycled again.

For example, smelting iron ore can not only produce iron nuggets, but also stone ore raw materials.

Although the quality is not high, it is also the standard compared to the interstellar era!

Nowadays, they are all high-quality stones!

Today's manufacturing rooms are not high enough to place arc furnaces.

So Lin Yu is also waiting. After the ion source is manufactured, he will cooperate with the ion crusher to harden the surrounding walls while pushing forward!

After checking the time, it was getting late. After washing up, Lin Yu also went to bed early!

The next day, after getting up, Lin Yu came to the manufacturing room to check the situation!

Walking to the basic manufacturing table, Lin Yu saw fifty plasma containers that had already been manufactured!

After taking them out one by one, Lin Yu took these plasma containers and came to the previous plasma release device.

After connecting them batch by batch, Lin Yu started the high-voltage discharge device.

With the rapid consumption of power, the power of the shelter also began to decrease.

From the flickering lighting fixtures, Lin Yu could feel the instability of the power grid.

The last one was a plasma container, which did not put a heavy burden on the power grid.

But this time, the fifty plasma vessels can clearly feel the heavy burden on the power grid!

Fortunately, the collection time is not very long. After half an hour, fifty plasma containers completed the plasma collection simultaneously.

The high-voltage discharge device is also automatically disconnected and no longer discharges!

Seeing that the plasma collection was completed, Lin Yu waited for a while. After the residual current at the scene disappeared, Lin Yu came to the plasma collection area wearing insulating equipment and collected these plasma containers one by one!

Coming to the basic manufacturing platform, he placed all the plasma containers at the inlet of the manufacturing platform. After selecting the ion source on the three-dimensional projection, Lin Yu started the manufacturing platform!

Watching the device running, Lin Yu also began to think about where to place the next smelting area!

Taking out the floor plan of the shelter, Lin Yu started to think about it!

First of all, there is no need to consider the manufacturing area and planting area.

And there isn’t much space in my bedroom.

But the warehouse on the side is a good place!

By opening a hole along the warehouse side and toward your bedroom, you can expand a large space.

Moreover, the height of the furnace is ten meters, and the newly expanded space cannot be only ten meters high.

It definitely needs to reach a height of fifteen meters.

Opening the plan view of the mountain, Lin Yu also roughly knew that above the selected area, the height of the mountain was about 40 meters.

This height is definitely enough, and compared with the floor of the warehouse, the floor height of the smelting area is about two meters lower.

Then a space was opened two meters below the warehouse, making the entire warehouse floor feel like it was suspended in the air.

Cooperating with the temperature of the smelting area, the entire warehouse can be kept in a dry state.

In this way, items placed on the ground will not become moldy, especially iron materials. If they are piled in the corner for a long time, they will easily oxidize!

After planning, it took two hours.

At this time, part of the product has accumulated at the outlet of the basic manufacturing table.

Looking at the first batch of ten ion sources that had been manufactured, Lin Yu knew that he could start working in the smelting area!

After pushing the ion crusher to the warehouse and finding a good location, Lin Yu did not start the crusher.

Instead, he first took out the hardening gun, installed the ion source, and hardened the surrounding areas of the warehouse. Even the area to be excavated was hardened.

With an ion crusher, hardened walls can still be broken through, but it just takes a little longer!

In the entire warehouse, Lin Yu used six ion sources.

After the hardening was completed, Lin Yu began to adjust the angle of the crusher so that it could dig at an angle of 30 degrees.

This way you can have a slope and it’s more convenient to transport supplies!

As the crusher was started, Lin Yu also began to set the forward distance!

According to the angle, it can be calculated that the length of this 30-degree slope is four meters, so Lin Yu first set a forward distance of four meters.

Soon, as the crusher moved forward, a downward-sloping ramp with an angle of 30 degrees gradually formed!

Although it is a hardened wall, in front of the ion crusher, it is like cutting tofu, quickly opening up the passage.

And because it is a hardened wall, what is thrown back are regular stones like the concrete debris filled in underground parking lots!

In Lin Yu's eyes, these are relatively good quarry materials!

Soon, the crusher completed the four-meter hole operation.

Seeing that the machine has stopped moving,

Lin Yu began to adjust the angle so that it gradually became parallel.

During this process, the ion circulation in the front is still on.

This results in that as the device is leveled, the gravel on the top is continuously cut off, falls to the ion circulation area, and then is continuously cut, and finally turns into fine sand and flows to the ground! After adjusting the angle, Lin Yu continued to start the device.

This time, Lin Yuzhun built a 20*20 meter room with a height of 15 meters.

As the device was running, Lin Yu began to manually control its direction!

As the device advances, Lin Yu is like driving a walking tractor to plow the fields.

After the first six-meter layer is completed, the smelting area will be roughly formed.

Next, is to expand the area upwards,

After Lin Yu opened a wrench of the device, the ion circulation area of ​​the entire device began to extend upward, and finally the entire device was lifted up a distance of six meters.

This is equivalent to the center of the entire circle being lifted upwards by six meters.

At this time, the entire device's territory begins to expand, stabilizing the entire device.

Lin Yu continued the previous operation and pushed the device forward.

The crushed soil and gravel were thrown behind Lin Yu along the track on the device.

As time goes by, the last bit of land has been excavated, and now the height of the entire smelting area has reached 12 meters.

After completing all this, Lin Yu looked at the room full of dirt and gravel and retreated first.

When I came to the manufacturing room and looked at the new batch of ion sources that had been manufactured, I immediately took them out and started to reinforce the space that had just been excavated!

The length of the entire space reaches 20 meters and the height reaches 12 meters.

in this case,

Lin Yu only used four ion sources on the ground.

Then there are three walls, two for each wall, six in total, and the facing warehouse, which has an additional ten meters of width, needs one,

At this time, the ten new batches were used up immediately, plus one of the remaining four. As for the remaining three, Lin Yu planned to wait until the next batch of ion sources came out before using them together.

In this way, the overall structural strength will not be unbalanced and cause possible accidents!